Which cover fits a Joseph Joseph Pocket or Pocket Plus?
Look up Pocket and Pocket Max cover references by exact board family, compare scaled deck sizes and check fitting and care.
Board-to-cover lookup
Choose the full board name. Add a cover reference to check it against the named manufacturer fit.
Use the comparison and method below. Turn on JavaScript to use the interactive tool.
Cover matches
Dimensions identify the deck family. They do not establish the elastic edge or nose fit on another board. For the two Max references, this lookup follows the named model on each maker page; equal dimensions alone do not establish cross-fit.
Source references checked November 2026. Published measurements and specifications are separate from the calculations.
Compare Pocket and Pocket Max deck sizes
The extra 20 cm in the Max length is much larger than an elastic-edge adjustment. A 90 cm Pocket cover is not a substitute for the 110 cm Max family. Both loose cover dimensions and photographs can be confusing: the lookup uses the pressing-deck size and exact named replacement instead.
Leave the cover field blank to list references for your selected board. Enter a known reference to compare it with that board. An unknown reference produces an unconfirmed result, rather than treating every unfamiliar number as incompatible. The Max and Max Plus entries follow the specific model named by the source; matching dimensions alone do not establish interchangeability between their covers.
Identify the board and measure the open deck
Open the board when it is empty and cool, using its instructions to position the legs and engage the working lock. Read the model or size information on the board or paperwork. Measure the pressing surface from end to end and across its widest point. The folded size, iron storage compartment and wall hook are separate from the cover fit.
The compact Joseph Joseph Pocket and Pocket Plus use a 90 × 33 cm pressing surface. Pocket Max and Pocket Max Plus use 110 × 35 cm. Check the whole name as well as the measurement, since the same family includes these two sizes. A cover for the larger deck needs a different reference.
Match the cover reference to the deck
Scroll sideways to compare Pocket sizes and replacement cover references.
| Board family and open deck | Cover reference | Layer type |
|---|---|---|
| Pocket / Pocket Plus 90 × 33 cm | 50011, grey · maker fit | Cotton top with padded felt underlay |
| Pocket / Pocket Plus 90 × 33 cm | 50012, advanced blue · maker fit | Multi-layer DripLock cover system |
| Pocket Max 110 × 35 cm | 5000033, grey · maker fit | Cover for the larger Pocket Max deck |
| Pocket Max Plus 110 × 35 cm | 5000034, advanced blue · maker fit | Advanced cover for the larger deck |
Joseph Joseph lists both the 50011 and 50012 replacement covers for its 90 × 33 cm Pocket boards. The complete Pocket Plus board also has the 90 × 33 cm deck. Use the named deck fit and replacement reference when checking the offer. Confirm the board version with Joseph Joseph if the label is missing or the size is unclear.
The Max references are included to help you identify a larger board. Compare your own label with the current maker’s compatibility information before buying. The tabletop board guide compares the complete boards if you are considering a different size.
Choose between the standard and advanced 90 cm layers
The grey 50011 replacement has a cotton top layer and padded felt underlay. It is an option for replacing the same kind of cover on the 90 × 33 cm Pocket. Check which layers come with the selected replacement and follow their fitting instructions together.
The blue 50012 adds Joseph Joseph’s DripLock multi-layer construction. The maker describes it for larger volumes of ironing or use with a steam generator. It is a cover choice for the stated deck fit. Check the complete board and iron instructions for where the appliance or generator base can be supported.
Joseph Joseph Pocket Plus Cover 50012
An elasticated, layered cover with cotton top, felt underlay and Joseph Joseph’s DripLock construction for the 90 × 33 cm Pocket deck.
Good for
A compatible 90 × 33 cm Pocket or Pocket Plus board when the exact cover layers need replacement.
Bear in mind
Check the deck size and board reference. Pocket Max uses a larger 110 × 35 cm deck and separate covers.
- 90 × 33 cm fit
- Elasticated sides
- Wipe clean
A thicker cover changes the material between garment and deck. It leaves the board’s frame, hinge and support requirements as specified by the board maker. Keep a steam generator base in the place the equipment instructions permit and check hose reach before using it on a tabletop setup. If the board itself moves or fails to lock, resolve that before fitting a cover.
Check the selected listing before ordering
Read the full product title and model reference on the selected offer. The 50012 is the replacement cover for the 90 cm family. A complete board offer can have similar photographs and use the same Pocket Plus name, so check the package contents as well as the colour. Look for the exact dimensions and the word cover.
Keep the model details from your existing board to hand. If the new cover seems too short despite the named fit, stop and compare references before forcing it around the corners. Check that it is the correct size and that no old layers are changing the profile. A fold at the centre or an elastic edge caught underneath can also make the fit look wrong.
If those checks leave a mismatch, contact Joseph Joseph with the board reference, cover reference and measurements. Photograph how the cover sits on the cool deck. Follow the maker’s advice before stretching, trimming or altering the fastening.
Fit the cover with the board cool and empty
Remove the iron and let the board cool and dry. Follow the cover replacement demonstration for the exact board. Open and secure it as directed so you can reach the edges without the centre folding as you work. Take a photo of the old layer arrangement if you need a reference.
Ease the old cover away from the perimeter and check which supplied layers the new system replaces. Inspect the deck and hinge area before covering them. Clean the surface only as the board maker allows and let it dry before fitting.
Position the new layers flat, align the shaped ends and work the elasticated sides around the rim. Smooth the material across both halves of the deck. Check the centre section carefully so there is no lump, twisted fabric or trapped edge where the board folds.
Test the surface with your hand while cool, then fold and reopen the board as instructed. Make sure the cover stays correctly seated and leaves the legs, hinge and closure clear. The general cover replacement guide gives more detail on diagnosing raised padding or uneven tension.
Follow the cover’s cleaning and storage instructions
Joseph Joseph specifies wipe cleaning for both the 50011 and 50012 covers and says to follow the care label for details. It also directs users to let the cover dry before folding and storing the board. Check the label supplied with your replacement before choosing a cleaning method.
After a steam-heavy session, give the board time to cool and dry in its permitted open position. If water is regularly collecting underneath, follow the dripping board checks to identify whether it starts at the iron, within the cover or beneath the deck. Replace worn layers by their exact reference and keep the remaining setup in the arrangement the maker intended.
Manufacturer fit and care references
Frequently asked questions
Does the Pocket Plus 50012 cover fit a standard Pocket board?
Joseph Joseph lists 50012 for its Pocket boards with a 90 × 33 cm pressing deck. Check the exact board size and reference, and ask the maker if your board version or fit is uncertain.
What is the difference between covers 50011 and 50012?
The grey 50011 has a cotton top and padded felt underlay. The blue 50012 uses the advanced DripLock multi-layer system. Both maker pages specify the 90 × 33 cm Pocket size.
Will a 90 cm Pocket cover fit Pocket Max?
Pocket Max uses a 110 × 35 cm deck with separate cover references. Check the open pressing surface and full model name before choosing a cover.
Can I machine wash a Pocket replacement cover?
Joseph Joseph specifies wipe cleaning for 50011 and 50012. Follow the care label supplied with the replacement and let the cover dry before folding and storing the board.
What should I do if the named cover seems too short?
Check the board and cover references, layer arrangement and elastic edges on a cool empty board. If it still does not fit, contact Joseph Joseph with the references and measurements before forcing or altering it.